Chromium on the corrosion resistance of stainless steel decisive role in the definition of stainless steel, ω (Cr) ≥ 10.5%, which is the...

Molybdenum effect Molybdenum in pure γ-Fe in the maximum solubility of about 3%, ω (C) ≈ 0.25% ~ 0.30%, the maximum solubility...

Nickel is the formation of austenite of alloying elements, but the role of nickel and chromium to only be fully demonstrated. If the...

Chemical elements are known to have more than 100 kinds of industrial materials used in steel can be encountered in about more than 20...

Matching the consumable to the parent material The chemical composition of stainless steel welding consumables is matched with the base...

Trade Names Associated With Stainless Steel table Note, where ‘Non-SS’ is shown in the Nearest Grade column, this indicates that the...

The traditional ‘free machining’ stainless steel have been based on sulphur (S) additions in the UK or alternatively, selenium (Se)...

In the past, stainless steel used in many applications for high-grade, aesthetic considerations, to improve the standard of living...

Sometimes stainless steel is considered to be an expensive material. However, experience has shown that using a corrosion...

The conclusive methods for determining the grade of a sample of metal, believed to be a stainless steel is by a chemicalanalysis method....

Soil corrosivity is often classified by its resistivity. 0 – 1500 ohm.cm very corrosive 1500 – 2500 ohm.cm ...

Unlike carbon steel, there have not been listings of open section sizes for stainless steel structural sections, until Sections Directory...

To ensure the highest quality gas at the point-of-use (POU), efforts have focused on the selection of the appropriate materials for...

The continued increase in semiconductor device sophistication, and resultant decrease in line widths, require cleaner components...

The specification of stainless steel bar (to BS970 EN 10088-3 ) and stainless steel tube plate (to BS1449) before 1983 covered two...

Stainless steel grades, such as the 304 (1.4301) or 316 (1.4401) types are generally suitable for storing and handling cold or unheated...

Stainless steel is widely used in foods and beverage manufacturing and processing industries, bulk storage and transportation,...

Stainless steel is selected for architectural application, for their corrosion resistance and potential aesthetic appearance. For...

Stainless steel is selected for architectural applications, as with most other applications, for their corrosion resistance. This is...

The raw material cost for a particular component may be 20 times the cost if made from one material compared to another on a weight...