A socket weld full coupling, joins pipe two pipe or to a nipple etc. Used to join small bore plain end pipes where the pipe spec requirement is socket weld.
Product: Socket Weld Full coupling
Size : 1/2″NB TO 4″NB IN
Class : 3000 LBS, 6000 LBS, 9000 LBS
Type : Socket Weld (S/W) & SCREWED (SCRD) – NPT, BSP, BSPT
Form : 45 Deg Elbow, 90 Deg Elbow, Forged Elbow, Threaded Elbow, Socket Weld Elbow.
MATERIALS : Stainless Steel Socket Weld Full coupling – SS Socket Weld Full coupling ASTM A182 F304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
Duplex Stainless Steel Socket Weld Full coupling – Duplex SS Socket Weld Full coupling ASTM / ASME A/SA 182 UNS F 44, F 45, F51, F 53, F 55, F 60, F 61.
Carbon Steel Socket Weld Full coupling – CS Socket Weld Full coupling ASTMA 105/A694/ Gr. F42/46/52/56/60/65/70
Low Temperature Carbon Steel Socket Weld Full coupling – LTCS Socket Weld Full coupling A350 LF3/A350 LF2
Alloy Steel Socket Weld Full coupling – AS Socket Weld Full coupling ASTM / ASME A/SA 182 F1/F5/F9/F11/F22/F91
Nickel Alloy Socket Weld Full coupling : Standard: ASTM / ASME SB 564 / 160 / 472. UNS 10276 (HASTELLOY C 276 Forged Elbow ) UNS 2200 (NICKEL 200 Forged Elbow ), UNS 2201 (NICKEL 201 Forged Elbow ), UNS 4400 (MONEL 400 Forged Elbow ), UNS 8020 (ALLOY 20 Forged Elbow ) UNS 8825 INCONEL 825 Forged Elbow ), UNS 6600 (INCONEL 600 Forged Elbow ), UNS 6601 (INCONEL 601 Forged Elbow), UNS 6625 (INCONEL 625 Forged Elbow),
Copper Alloy Socket Weld Full coupling ASTM / ASME SB 61 / 62 / 151 / 152. C 70600 (CU -NI- 90/10) – Cupro Nickel Forged Elbow C 71500 (CU -NI- 70/30) – Copper Nickel Forged Elbow UNS NO. C 92200, UNS NO. C 83600, UNS NO. UNS NO C 10100, C 10200, C 10300, C 10800, C 12000, C 12200
Product name : socket weld full coupling
Nominal Diameter Depth of Socket Dimension of Socket
Wall Thickness
End Wall Thickness
The length of midst
Cmin
Kmin
Coupling
Half- Coupling
DN
NPS
Jmin
d13000LB6000LB9000LB3000LB6000LB3000LB
E
F
Sch80
Sch160
XXS
Sch80
Sch160
XXS
6
1/8
1010.7
3.2
3.5
–5.06.5–61681/41014.13.34.0–5.06.5–616103/81017.53.54.4–5.06.5–617151/21021.84.15.28.26.58.011.01022203/41327.44.36.18.66.58.012.510242511334.25.07.010.09.511.014.01329321.1/41342.95.37.010.69.511.014.01330401.1/21348.35.67.811.211.012.516.013325021361.16.19.512.212.516.019.01941652.1/21676.9(73.8)7.712.5–16.019.0–1943
8031689.88.3
13.8
–19.022.0–1945
100
4
19115.5
9.4
–
–22.028.5–1948
Note: Average of socket wall thickness around periphery shall be no less than listed values. The minimum values are permitted in localized areas.
Note: 1 Average of socket wall thickness around periphery shall be no less than listed values. The minimum values are permitted in localized areas. 2 Upper and lower values for each size are the respective maximum and minimum dimensions.
Comments