Jacket gasket with soft pliable core, surrounded by a metal jacket that totally or partially encloses the filler material. Partition bars can be incorporated , integrally or welded into the gasket. Jacketed is made by hands, and welded. Soft pliable core within thin metal covering. Wide choice of jacket and filler materials.
Types of Jacket Gaskets
Metal jacketed gaskets
Metal jacketed gaskets are the most basic type of semi-metallic gaskets combining the high pressure suitability and blow out resistance of metallic materials. The gaskets offer an economical seal where sealing faces are narrow and can be produced in a variety of shapes, making them a good option for heat exchanger jointing.
Stamping jacket gasket
Stamping jacket gasket by punch machines, the gasket with soft pliable core, surrounded by a metal jacket that totally or partially encloses the filler material. Partition bars can be incorporated , integrally or welded into the gasket. Whole face gaskets have perfect sealing stability.
Typical applications * Heat exchangers * Exhaust gaskets * Valve bonnet gaskets * Narrow flanges Jacketing Materials & Temp.
Materials
Hardness HB
Temp.℃
Carbon Steel
90
-60~+450
304 (L)
130
-270~+550
316 (L)
130
-270~+550
321
130
-270~+550
Monel
110
-60~+500
Inconel
90
-60~+600
AL
30
-250~+300
CU
80
-250~+400
Filling Materials: Flexible graphite, Asbestos, Non-asbestos, Ceramic Fiber, Reinforced Graphite, Mica, etc.
Metal Jacketed Gasket Normal Shapes
Tolerance The gasket thickness tolerance is (+0.03 inch., -0.000 inch) (+0.8mm, -0.0mm) (1). For gaskets NPS 1/2 through NPS 24, the outside and inside diameter tolerances are +0.06 inch, -0.0 inch (+1.5mm, -0.0mm); (2). There are no Class 400 flange for NPS 1/2 through NPS 3 (Use Class 600); (3) .There are no Class 600 flanges for NPS 1/2 through NPS 2-1/2 (Use Class 1500); (4). There are no Class 2500 NPS 14 and larger Diameter * OD: Less than 5,000mm * Thickness: 2~8mm
Comments