Graphite Gasket that it is made from graphite as homogeneous, reinforced by metal mesh, foil or tanged metal. Graphite gaskets is widely used for pipe flange, pump, valve joint.
Graphite Gasket Reinforced with Tanged metal insertion
Graphite Gasket Reinforced with Tanged metal insertion made by 98% pure exfoliated graphite reinforced a central layer of 0.1mm thickness tanged stainless steel. The graphite is compressed without the use of adhesives.
* Tough and versatile composite for high pressures. * Strong composite construction without adhesives. * Extra strength for ease of handing and fitting. * With or without eyelets.
Prime Features
* Exceptional resistance to blow-out and crushing.
* Tough and versatile composite for high pressures.
* Strong composite construction with or without eyelets.
Specification
> Density: 1.0g/cm3
> Compressibility (ASTM F36A): 15~35%
> Recovery (ASTM F36A): >/= 20%
> Pressure: 200bar
> Temperature: -240~+550 oC
> PH: 0~14
Dimension
ASME B 16.21, DIN2690, And according to your requirements.
Pure Graphite Gasket
A premium quality graphite jointing gaskets made by 98% pure exfoliated graphite.
High quality grade made by 99.8% grade graphite is available for nuclear industry applications.
* Standard grade: 98% pure exfoliated graphite. * Widest temperature range. * Very easy to cut, although large gaskets may need support carriage and fitting.
Prime Features * Widest temperature range.. * Very easy to cut: although large gaskets may need support during carriage and fitting. Specification * PDensity: 0.7~1.0g/cm3 * Compressibility (ASTM F36A): 30% * Recovery (ASTM F36A): >/= 10% * Pressure: 40bar * Temperature: -240~+550 oC * PH: 0~14 Dimension ASME B 16.21, DIN2690, And according to your requirements.
Comments