top of page
Writer's pictureWilson Pipeline

Grade 904L Stainless Steels (UNS N08904)

Grade 904L stainless steels (UNS N08904) are non-stabilized austenitic stainless steels with low carbon content. This high alloy stainless steel is added with copper to improve its resistance to strong reducing acids, such as sulphuric acid. The steel is also resistant to stress corrosion cracking and crevice corrosion. Grade 904L is non-magnetic, and offers excellent formability, toughness and weldability.

Grade 904L contains high amounts of expensive ingredients, such as molybdenum and nickel. Today, most of the applications that employ grade 904L are replaced by low-cost duplex stainless steel 2205.

Key Properties

The following sections describe the properties of flat rolled products in ASTM B625. The specifications may not be identical for other products such as bar, tube and pipe.

Composition

The table below provides the compositional ranges of grade 904L stainless steels:

Table 1. Composition ranges of grade 904L stainless steels

Grade

C

Mn

Si

P

S

Cr

Mo

Ni

Cu

904L

min.

max.

0.02

2

1

0.045

0.035

19

23

4

5

23

28

1

2

Mechanical Properties

The typical mechanical properties of grade 904L stainless steels are given in the table below:

Table 2. Mechanical properties of grade 904L stainless steels


Grade

Tensile Strength (MPa) min

Yield Strength 0.2% Proof (MPa) min

Elongation (% in 50mm) min

Hardness

Rockwell B (HR B)

Brinell (HB)

904L

490

220

36

70-90 typical

150

Physical Properties

The physical properties of grade 904L stainless steels are tabulated below:

Table 3. Typical physical properties of grade 904L stainless steels


Grade

Density (kg/m3)

Elastic Modulus (GPa)

Mean Co-eff of Thermal Expansion (µm/m/°C)

Thermal Conductivity (W/m.K)

Specific Heat 0-100°C (J/kg.K)

Elec Resistivity (nΩ.m)

0-100°C

0-315°C

0-538°C

At 20°C

At 500°C

904L

7900

190

15

11.5

500

952

Grade Specification Comparison

The following table outlines the approximate grade comparisons of 904L stainless steels:

Table 4. Grade specifications of grade 904L stainless steels


Grade

UNS No

Old British

Euronorm

Swedish SS

Japanese JIS

BS

En

No

Name

904L

N08904

904S13

1.4539

X1NiCrMoCuN25-20-5

2562

Possible Alternative Grades

The suitable alternatives to 904L stainless steels are tabulated below:

Table 5. Possible alternative grades to grade 904L stainless steels

Grade

Reasons for choosing grade 904L

A lower cost alternative, but with much lower corrosion resistance.

6Mo

A higher resistance to pitting and crevice corrosion is needed.

2205

A very similar corrosion resistance, with the 2205 having higher mechanical strength, and at a lower cost to 904L. (2205 not suitable for temperatures above 300°C.)

Higher corrosion resistance is needed, together with a higher strength than 904L.

Corrosion Resistance

Grade 904L stainless steels have excellent resistance to warm seawater and chloride attack. The high resistance of grade 904L against stress corrosion cracking is due to the presence of high amounts of nickel in its composition. Moreover, the addition of copper to these grades develops resistance to sulphuric acid and other reducing agents in both aggressive and mild conditions.

The corrosion resistance of grade 904L is intermediate between super austenitic grades, with 6% molybdenum content, and standard 316L austenitic grades. Grade 904L is less resistant to nitric acid than grades 304L and 310L, which are free of molybdenum. This steel grade needs to be solution treated following cold working, to achieve maximum stress corrosion cracking resistance under critical environments.

Heat Resistance

Grade 904L stainless steels offer good oxidation resistance. However, the structural stability of this grade collapses at high temperatures, particularly above 400°C.

Heat Treatment

Grade 904L stainless steels can be solution heat-treated at 1090 to 1175°C, following by rapid cooling. Thermal treatment is suitable for hardening these grades.

Welding

Welding of grade 904L stainless steels can be performed using all conventional methods. This grade does not require pre-heat and post-weld heat treatments. Grade 904L can be subjected to hot cracking in constrained weldment. Grade 904L electrodes and rods are used for welding grade 904L steels according to AS 1554.6.

Fabrication

Grade 904L stainless steels are high purity steels with low sulphur content. They can be machined using any standard methods. These grades can be readily bent to a small radius under cold conditions. Although subsequent annealing is not required in most cases, it should be carried out when the fabrication is performed under severe stress corrosion cracking conditions.

Applications

Some of the major applications of grade 904L stainless steels include:

  1. Wiring in electrostatic precipitators

  2. Oil refinery components

  3. Seawater cooling devices

  4. Gas scrubbing plants

  5. Pulp and paper processing industries

  6. Acetic, phosphoric and sulphuric acid processing plants

  7. Stainless Steel Flanges


Source – wilsonpipeline Pipe Industry Co., Limited (https://www.wilsonpipeline.com)

2 views0 comments

Recent Posts

See All

Knowledge About Steel Elbow

Elbows 45° - 90° - 180° LR/SR The function of a elbow is to change direction or flow in a piping system. By default, there are 5...

Knowledge About Buttweld Fittings

Buttweld Fittings general A pipe fitting is defined as a part used in a piping system, for changing direction, branching or for change of...

List of Chemical Elements

Flange Fittings&Pipes origin supplier from china Wilson Pipeline WhatsApp+8618632758880 sales@wilsonpipeline.com www.wilsonpipeline.com

Comments


bottom of page