top of page
Writer's pictureWilson Pipeline

Duplex Stainless Steel Grades Comparison Table By wilsonpipeline.com

The Duplex Stainless Steel Grades Comparison Table is intended to relate former BS, EN, German and Swedish grade designations to the current EN duplex stainless steel numbers, AISI grades and UNS (Unified Numbering System) numbers. The table is based on the ‘wrought’ ie long products (duplex stainless steel pipes etc), pipe fitting products (duplex stainless steel eccentric reducer, etc), duplex stainless steel numbers published in EN 10088 and related standards.  Castings products use different compositions and so have their own duplex stainless steel numbers in EN 10283. The related castings grades in both EN 10283 and BS 3100 are included in the table.

The ‘Chemical Composition’ is intended to represent the composition only. This does not show the specified or typical composition of commercially available duplex stainless steels. Specified ranges for the wrought European grades can be found in either the EN 10088-2 or EN10088-3 tables. None of the duplex stainless steels listed were included in either BS 970 or BS 1449. The castings grades specified ranges can be found in the EN 10283 or BS 3100 tables.

These are comparisons only and cannot be assumed to be direct equivalent grades. The data given is not intended to replace that shown in inpidual standards to which reference should always be made.

EN 10088Common NamesBS WroughtAISIUNSEnGerman DINSSEN 10283BS CastChemical Composition..........CCrNiMoOthers1.4162LDX 2101––S32101–––––0.030x21.51.50.35Mn1.4362SAF2304/UR35N––S32304–X2CrNiN23-42327––0.030x2240.40.4Cu1.4410SAF2507 /UR47N/F53––S32750––23281.4468–0.030x2463–1.4460453S–329S32900–X4CrNiMoN27-5-22324––0.05x2551.5–1.4462SAF2205/Falc223 /UR45N/F51318S13–S31803 S32205–X2CrNiMoN22-5-323771.4470332C150.030x2253–1.4501Zeron 100/F55––S32760–––1.4417–0.030x24630.5W1.4507Ferralium 255 /UR52N/F61––S32550–––––0.030x24631Cu

Note Chemical composition figures are intended to be representative of the grade, not typical. ‘x’ indicates a maximum

Source: wilsonpipeline Pipe Industry Co., Limited (www.wilsonpipeline.com)

0 views0 comments

Recent Posts

See All

Knowledge About Steel Elbow

Elbows 45° - 90° - 180° LR/SR The function of a elbow is to change direction or flow in a piping system. By default, there are 5...

Knowledge About Buttweld Fittings

Buttweld Fittings general A pipe fitting is defined as a part used in a piping system, for changing direction, branching or for change of...

List of Chemical Elements

Flange Fittings&Pipes origin supplier from china Wilson Pipeline WhatsApp+8618632758880 sales@wilsonpipeline.com www.wilsonpipeline.com

Commentaires


bottom of page