Concentric reducer By wilsonpipeline.com

Concentric reducer is steel hot-pressing molding or forging forming of reducer, it is the connection form of the reducer directly with steel pipe butt welding, the main manufacturing standards generally concentric reducer is ASME B16.9. Concentric reducer and eccentric reducer, the material is below: Carbon steel: ASTM/ASME A234 WPB, WPC Alloy: ASTM/ASME A234 WP 11-12-1 – WP WP WP 22 – WP 5 – WP 91-35 crmov WP911, 15 mo3 15 crmov, Stainless steel: ASTM/ASME A403 WP 304-304 – l – 304 – h – 304 ln – 304 n ASTM/ASME A403 WP 316-316 l – 316 – h – 316 ln – 316 – n – 316 ti ASTM/ASME A403 WP 321-321 – h ASTM/ASME A403 WP 347-347 – h Low temperature steel: ASTM/ASME A402 WPL3 – WPL 6 High performance steel: ASTM/ASME A860 WPHY 42-46-52-60-65-65 Cast steel, alloy steel:  stainless steel, copper, aluminum alloy, plastic, argon luo drain, PVC, PPR, RFPP (reinforced polypropylene), etc. In manufacturing standards Divided into national standard and electric standard, vessel standard, standard, water standard, American standard, Germany standard, Japanese standard, the standard and so on. the radius of curvature: Divided into long radius elbow and short radius elbow. Long radius elbow refers to its radius of curvature is equal to 1.5 times the outer diameter of tube, R = 1.5 D. Short radius elbow refers to its radius of curvature is equal to the pipe diameter, R = 1.0 D. To bend diameter (D, R for the radius of curvature). 5. If according to the grades of pressure points: about seventeen kinds, and American standard pipe is the same, there are: Sch5s, Sch10s, Sch10, Sch20, Sch30, Sch40s, STD, Sch40, Sch60, Sch80s, XS; Sch80, SCH100, Sch120, Sch140, Sch160, XXS; One of the most common is two kinds of STD and XS.