Cladding & Weld Overlay provides protection against corrosion and wear for process and oil and gas pipeline equipment. Weld overlay can be applied to extend the service life of new parts, or refurbish parts that have corroded or worn surfaces.
Reliable integrated and advanced welding technologies provides effective welding solutions for : Oil & Gas Industries Sub-Sea Applications Petrochemicals & Refineries
Types of Cladding Process :
Weld Overlay :
Weld Overlay is a fusion welding technique used to deposit weld metal on to component to achieve the desired dimensions or properties replacing lost material or providing a wear or corrosion resistance surface.
Explosion Bond :
Explosion bonding is a process of bonding two dissimilar materials with the help of pressure and heat produced by explosion. The explosive material is spread on the material to be cladded which is kept on top of the base material. On ignition of the explosive, resultant thrust bonds the clad plate on the base plate underneath. Various combination of clad plate and base plate thickness can be bonded, depending on the job requirements.
Clad & Weld Overlay MaterialsBase MaterialCarbon Steel, Stainless Steel & Low Alloy SteelClad MaterialSS304, SS316L, SS317L, SS410, UNS N0 8825, UNS N06625, Hastelloy C22, Hastelloy C276, Hastelloy B3, UNS N04400Weld Overlay MaterialER410S, 430, ER308L, 309L, ER309LMo, 316L, 317L, UNS N08825, UNS N0 6625, Hastelloy C22, Hastelloy C276, Hastelloy B3, UNS N04400
Reliable also offers cladded & weldoverlayed components of various sizes & thickness with cladding by weld overlay or explosion bonding :
Pipes
Diameter
Thickness
Clad / Weldoverlay ThicknessWelded Pipes
2″ NB to 42″ NB
Minimum 7mm & Above
Minimum 1 mmSeamless Pipes
2″ NB to 42″ NB
Minimum 7mm & Above
Fittings
Size
Thickness
Weldoverlay ThicknessElbows
2″ & Above
Minimum 7mm & Above
Minimum 1 mmReducers
2″ & Above
Minimum 7mm & Above
Minimum 1 mmTees
2″ & Above
Minimum 7mm & Above
Minimum 1 mmWeldolets
2″ & Above
Minimum 7mm & Above
Minimum 1 mmSockolets
2″ & Above
Minimum 7mm & Above
Minimum 1 mm
Flanges
Size
Thickness
Weldoverlay ThicknessWNRF, BLRF, WNRTJ
2″ & Above
Minimum 7 mm & Above
Minimum 1 mm (or as required)
Comments